العودة إلى المدونة
المقارنات 2026-11-20 Mutual Screw & Supply 5 مشاهدة

Hex Machine Bolts vs Hex Head Cap Screws: Key Differences

Hex Machine Bolts vs Hex Head Cap Screws: Key Differences

Compare hex machine bolts and hex head cap screws: understand thread length, grip, and application differences. Includes a 5/16-18 x 3" partially threaded bolt example.

What Sets a Hex Machine Bolt Apart

A hex machine bolt and a hex head cap screw look similar, but their intended use differs in one key area: thread length. A hex machine bolt typically has a partially threaded shank, leaving an unthreaded section called the grip. This grip sits in the clearance hole of the parts being joined, providing a smooth bearing surface in the shear plane. A hex head cap screw is usually threaded all the way to the head (or nearly so) and is designed to be used with a tapped hole or a nut, often in high-torque applications.

Example: 5/16-18 x 3" Partially Threaded Hex Machine Bolt

  • 5/16-18 X 3" Hex Machine Bolts | Steel Zinc Plated | Partially Threaded (150 / Pkg.): 5/16-18 X 3" Hex Machine Bolts in Steel Zinc Plated. A hex head machine bolt with a partially threaded shank per ASME B18.2.1, providing an unthreaded grip length for bolted connections through clearance holes. Partially threaded shank for a smooth bearing surface in the shear plane of bolted joints. Hex head for wrench-driven, high-torque installation. Zinc plating for everyday corrosion resistance. This bolt clearly shows the defining feature of a machine bolt: a partially threaded shank that creates a grip zone. The zinc plating adds corrosion resistance for indoor or light outdoor use, and the hex head accepts a wrench for high-torque tightening.
    5/16-18 X 3" Hex Machine Bolts | Steel Zinc Plated | Partially Threaded (150 / Pkg.)
    5/16-18 X 3" Hex Machine Bolts | Steel Zinc Plated | Partially Threaded (150 / Pkg.)

Hex Machine Bolt vs Hex Head Cap Screw: Key Differences

The main differences lie in thread length, intended joint design, and head markings. The table below summarizes the typical distinctions.

  • Thread Length: Hex machine bolts are often partially threaded (grip length). Hex head cap screws are usually fully threaded, or nearly so.
  • Intended Joint: Machine bolts are designed for clearance holes, with the grip spanning the joint and threads only engaging the nut. Cap screws are meant for tapped holes or high-strength nut connections.
  • Head Marking: Cap screws often have grade markings (e.g., three radial lines for Grade 8). Machine bolts may have no markings or a manufacturer mark.
  • Installation Tool: Both use a wrench on the hex head. Cap screws may also have a socket drive in some variants.
  • Typical Standard: Machine bolts: ASME B18.2.1. Cap screws: ASME B18.2.1 or B18.2.3.1 (depending on type).

When to Choose a Partially Threaded Hex Machine Bolt

Choose a partially threaded hex machine bolt when your joint passes through a clearance hole and you want the unthreaded portion to bear against the hole wall. This is common in structural steel connections, machinery assembly, and any application where shear loads pass through the bolt shank. The grip length prevents thread damage inside the hole and improves shear strength. The 5/16-18 x 3" steel zinc plated bolt is a good example for light structural or equipment mounting where corrosion resistance is moderate.

When a Hex Head Cap Screw Is the Better Fit

Hex head cap screws are the go-to when you need full thread engagement in a tapped hole or a high-strength nut joint. They are common in engine blocks, heavy machinery, and applications requiring precise clamping force. If your design calls for a fully threaded fastener and you need to know the exact grade (e.g., Grade 5 or Grade 8), a cap screw is the correct choice. The catalog does not list a cap screw in this size, so for a fully threaded 5/16-18 fastener, you would look for a hex head cap screw.

What the Catalog Does Not Confirm

The catalog does not specify a grade or strength rating for the 5/16-18 x 3" hex machine bolt. It also does not provide a recommended torque value, shear strength, or material hardness. For applications requiring a specific grade (e.g., ASTM A307 or SAE J429), verify the bolt's markings or request a certification from the supplier.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي