براغي رأس سداسي M18-2.5 X 200mm | فولاذ فئة 8.8 مطلي بالزنك | خيط جزئي (10 / عبوة)

The partially threaded design on these M18 bolts made aligning the frame assembly much easier than fully threaded fasteners. Zinc plating looks clean and the hex heads seated perfectly with my socket set.

Just finished rebuilding a piece of equipment on the shop floor and these bolts seated perfectly into the partial thread, no binding halfway through. That 200mm length gave me plenty of grip with a socket, and the zinc coating still looks clean after a few days of handling.

Had to swap out two worn bolts on a press jig and these seated cleanly with a socket. The zinc coating looks even and the threads on the partially threaded section were consistent the whole way down. Only gripe is the heads felt a touch soft when torquing to spec, but they held fine.