Mutual Screw & Supply

حلقات O من Viton FKM 0.139" CS × 0.796" ID | AS568-211 | داش 211 | مقطع مربع | صلابة 70 (70 / عبوة)

حلقات O من Viton FKM 0.139" CS × 0.796" ID | AS568-211 | داش 211 | مقطع مربع | - Main image
$38.25 $55.43 In stock

حلقات O من Viton FKM بقطر داخلي AS568-211-0.796 بوصة ومقطع عرضي 0.139 بوصة. نطاق الخدمة من -15°F إلى +400°F (-26°C إلى +204°C). تُعرف أيضًا باسم FKM، فلوورإيلاستومر.

المواصفات

  • نوع المنتج: حلقة دائرية (مقطع مربع)
  • المادة: فيتون FKM
  • حجم الشرطة AS568: 211
  • المقطع العرضي: 0.139" (3.53 مم)
  • القطر الداخلي: 0.796" (20.22 مم)
  • مقياس الصلابة: 70 شور A
  • نطاق درجة الحرارة: من -15°F إلى +400°F (من -26°C إلى +204°C)
  • نوع القياس: إمبراطوري
  • كمية العبوة: 70 لكل عبوة
قبل الدفع

تظهر طرق الدفع المتاحة والإجمالي النهائي عند الدفع.

متى يُشحن الطلب

ضع في الحسبان وقت تجهيز الطلب ونقله.

Standard Shipping: التجهيز (أيام عمل) 0–1; النقل (أيام عمل) 7–15.

Express Shipping: التجهيز (أيام عمل) 0–1; النقل (أيام عمل) 7–15.

عرض الشروط
طلب استرداد

تواصل مع المتجر برقم الطلب للاستفسار عن الاسترداد.

استفسر عن مدة الاسترداد قبل الإرجاع.

عرض الشروط
تكاليف التوصيل

تحقق من رسوم الوجهة وخدمة الشحن المختارة.

Standard Shipping · الولايات المتحدة: ‏٠٫٠٠ US$

Express Shipping · الولايات المتحدة: ‏٣٫٩٩ US$

عرض الشروط
إرجاع منتج

راجع الشروط قبل إرسال المنتج للإرجاع.

الولايات المتحدة · مهلة الإرجاع (أيام بعد التسليم): 30. طريقة الإرجاع: بالبريد. رسوم الإرجاع: يدفع البائع.

عرض الشروط

Customer Reviews (5.0 / 5 · 5 reviews)

Timothy L. ★★★★★

The square profile on these o-rings really grabs hold in the groove, and the Viton material feels tough enough for high-heat applications. I used them to seal a valve cover gasket and haven't seen a single drip yet—definitely worth buying a pack.

Eva ★★★★★

Needed to replace a leaky hydraulic seal on a log splitter, and these square-profile Viton o-rings held up perfectly under the 350°F heat from the oil. The 70 durometer is firm enough to seat without being a struggle to install, and the whole pack came in handy for spares.

Joshua ★★★★★

Finally found square-profile o-rings that actually stay put in a high-temp hydraulic fitting I’ve been fighting with for months. The 70 durometer Viton feels noticeably tougher than the standard Buna-N ones I used before, and they slide into the groove without binding.