Mutual Screw & Supply

0.21" CS × 5.475" ID حلقات O من Viton FKM | AS568-353 | داش 353 | صلابة 75 | بني (8 / عبوة)

0.21" CS × 5.475" ID حلقات O من Viton FKM | AS568-353 | داش 353 | صلابة 75 | - Main image
$34.36 $56.33 In stock

حلقات O-Ring من Viton FKM بقطر داخلي 568-353، 5.475" وقطر مقطع 0.21". نطاق الخدمة من -15°F إلى +400°F (-26°C إلى +204°C). يُعرف أيضًا باسم FKM، الفلورويلاستومر.

المواصفات

  • نوع المنتج: حلقة O-Ring
  • المادة: Viton FKM
  • حجم AS568: 353
  • قطر المقطع: 0.21" (5.33 مم)
  • القطر الداخلي: 5.475" (139.06 مم)
  • الصلادة: 75 Shore A
  • اللون: بني
  • نطاق درجة الحرارة: -15°F إلى +400°F (-26°C إلى +204°C)
  • نوع القياس: إمبراطوري
  • كمية العبوة: 8 لكل عبوة
قبل الدفع

تظهر طرق الدفع المتاحة والإجمالي النهائي عند الدفع.

متى يُشحن الطلب

ضع في الحسبان وقت تجهيز الطلب ونقله.

Standard Shipping: التجهيز (أيام عمل) 0–1; النقل (أيام عمل) 7–15.

Express Shipping: التجهيز (أيام عمل) 0–1; النقل (أيام عمل) 7–15.

عرض الشروط
طلب استرداد

تواصل مع المتجر برقم الطلب للاستفسار عن الاسترداد.

استفسر عن مدة الاسترداد قبل الإرجاع.

عرض الشروط
تكاليف التوصيل

تحقق من رسوم الوجهة وخدمة الشحن المختارة.

Standard Shipping · الولايات المتحدة: ‏٠٫٠٠ US$

Express Shipping · الولايات المتحدة: ‏٣٫٩٩ US$

عرض الشروط
إرجاع منتج

راجع الشروط قبل إرسال المنتج للإرجاع.

الولايات المتحدة · مهلة الإرجاع (أيام بعد التسليم): 30. طريقة الإرجاع: بالبريد. رسوم الإرجاع: يدفع البائع.

عرض الشروط

Customer Reviews (4.8 / 5 · 5 reviews)

Ellie C. ★★★★★

I needed a high-temp seal for a steam line, and these viton FKM rings handled the 350°F cycling without any issue. The 75 durometer material feels firm but still seated nicely in the groove. Exactly what the spec called for.

Lily ★★★★★

These Viton o-rings handled the high-heat seal on my compressor's discharge line without any issues, and the 75 durometer felt just right for the application. Given the 400°F rating, I'm confident they'll hold up under the extreme conditions.

Adam ★★★★★

The 0.21" cross-section fit perfectly into the groove on my hydraulic pump, and the 75 durometer feels firm but not brittle. I've had trouble with standard Buna-N o-rings failing under continuous heat near 200°F, but these Viton ones haven't hardened or cracked after a month of daily use. They seale