Mutual Screw & Supply

Juntas tóricas PTFE 0.103" CS x 0.799" DI | AS568-117 | Dash 117 | Dureza 11 (50/Paquete)

Juntas tóricas PTFE 0.103" CS x 0.799" DI | AS568-117 | Dash 117 | Dureza 11 - Main image
$35.62 $58.39 In stock

Juntas tóricas de PTFE en AS568-117, 0.799" de diámetro interior por 0.103" de sección transversal. Rango de servicio -350°F a +500°F (-212°C a +260°C). También conocido como teflón, politetrafluoroetileno.

Especificaciones

  • Tipo de producto: Junta tórica
  • Material: PTFE
  • Tamaño de guión AS568: 117
  • Sección transversal: 0.103" (2.62 mm)
  • Diámetro interior: 0.799" (20.29 mm)
  • Dureza: 11 Shore A
  • Rango de temperatura: -350°F a +500°F (-212°C a +260°C)
  • Tipo de medida: Imperial
  • Cantidad por paquete: 50 por paquete
Antes de pagar

Los métodos disponibles y el total final aparecen al pagar.

Cuándo sale el pedido

Cuenta con el tiempo de preparación y de transporte.

Standard Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Express Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Ver condiciones
Solicitar un reembolso

Contacta con la tienda con tu número de pedido para consultar el reembolso.

Consulte el plazo de reembolso antes de devolver el artículo.

Ver condiciones
Costes de entrega

Comprueba el coste para el destino y servicio elegidos.

Standard Shipping · Estados Unidos: 0,00 US$

Express Shipping · Estados Unidos: 3,99 US$

Ver condiciones
Devolver un artículo

Revisa las condiciones antes de devolver un artículo.

Estados Unidos · Plazo de devolución (días desde la entrega): 30. Método de devolución: Por correo. Gastos de devolución: Paga el vendedor.

Ver condiciones

Customer Reviews (5.0 / 5 · 5 reviews)

Timothy ★★★★★

Swapped out a worn-out seal in a cryogenic test rig and these PTFE rings seated perfectly without any deformation. The -350°F rating gives me confidence they’ll hold up where standard rubber would shatter. Just wish they came in smaller quantities, but the 50-pack is a fair deal for the price.

Eli ★★★★★

Pressing these into a tight groove was tricky at first because they're so stiff, but once seated they seal perfectly on my high-temp valve. The 11 durometer feels almost like hard plastic, which is exactly what I needed for the -350°F cryogenic application.

John ★★★★★

The temperature range is the real selling point here—I've pushed them down to near -300°F without any cracking or hardening. The 11 durometer rating means they're surprisingly flexible for PTFE, which made installation onto the groove a breeze. Fifty in the pack gives me plenty of spares for future