Mutual Screw & Supply

Juntas Tóricas Viton FKM 0.07" CS X 4.239" ID | AS568-046 | Dash 046 | Dureza 75 | Negro (40 / Paq.)

Juntas Tóricas Viton FKM 0.07" CS X 4.239" ID | AS568-046 | Dash 046 | Dureza - Main image
$41.65 $55.53 In stock

Juntas tóricas de Viton FKM en tamaño AS568-046, diámetro interior de 4.239" y sección transversal de 0.07". Rango de servicio de -15°F a +400°F (-26°C a +204°C). También conocidas como FKM, fluoroelastómero.

Especificaciones

  • Tipo de producto: Junta tórica
  • Material: Viton FKM
  • Tamaño de guión AS568: 046
  • Sección transversal: 0.07" (1.78 mm)
  • Diámetro interior: 4.239" (107.67 mm)
  • Dureza: 75 Shore A
  • Color: Negro
  • Rango de temperatura: -15°F a +400°F (-26°C a +204°C)
  • Tipo de medición: Imperial
  • Cantidad por paquete: 40 por paquete
Antes de pagar

Los métodos disponibles y el total final aparecen al pagar.

Cuándo sale el pedido

Cuenta con el tiempo de preparación y de transporte.

Standard Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Express Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Ver condiciones
Solicitar un reembolso

Contacta con la tienda con tu número de pedido para consultar el reembolso.

Consulte el plazo de reembolso antes de devolver el artículo.

Ver condiciones
Costes de entrega

Comprueba el coste para el destino y servicio elegidos.

Standard Shipping · Estados Unidos: 0,00 US$

Express Shipping · Estados Unidos: 3,99 US$

Ver condiciones
Devolver un artículo

Revisa las condiciones antes de devolver un artículo.

Estados Unidos · Plazo de devolución (días desde la entrega): 30. Método de devolución: Por correo. Gastos de devolución: Paga el vendedor.

Ver condiciones

Customer Reviews (4.6 / 5 · 5 reviews)

Harper F. ★★★★★

Put these on a hydraulic press at work that sees 350°F cycles and they've held up perfectly through the first month. The FKM material is clearly more heat-resistant than the standard Buna I was using before.

Owen ★★★★★

The 75 durometer rating feels just right—firm enough to hold pressure but still easy to seat in the groove. I swapped out a leaky Buna-N seal with one of these Viton rings and the -15°F to +400°F range gives me peace of mind for hot oil service.

Owen O. ★★★★★

These o-rings fit perfectly on my hydraulic cylinder flange, which needed that exact 4.239" ID. The Viton material feels noticeably more durable than the standard rubber ones I've used before, and they sealed tight with zero leaks on the first try.