Mutual Screw & Supply

Juntas tóricas Viton FKM 0,139" CS × 0,546" DI | AS568-207 | Dash 207 | Dureza 75 | Negro (75 / paquete)

Juntas tóricas Viton FKM 0,139" CS × 0,546" DI | AS568-207 | Dash 207 | Dureza - Main image
$34.69 $55.06 In stock

Juntas tóricas Viton FKM en tamaño AS568-207, 0.546" de diámetro interior por 0.139" de sección transversal. Rango de servicio -15°F a +400°F (-26°C a +204°C). También conocido como FKM, fluoroelastómero.

Especificaciones

  • Tipo de producto: Junta tórica
  • Material: Viton FKM
  • Tamaño de junta: 207
  • Sección transversal: 0.139" (3.53 mm)
  • Diámetro interior: 0.546" (13.87 mm)
  • Dureza: 75 Shore A
  • Color: Negro
  • Rango de temperatura: -15°F a +400°F (-26°C a +204°C)
  • Tipo de medida: Imperial
  • Cantidad por paquete: 75 por paquete
Antes de pagar

Los métodos disponibles y el total final aparecen al pagar.

Cuándo sale el pedido

Cuenta con el tiempo de preparación y de transporte.

Standard Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Express Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Ver condiciones
Solicitar un reembolso

Contacta con la tienda con tu número de pedido para consultar el reembolso.

Consulte el plazo de reembolso antes de devolver el artículo.

Ver condiciones
Costes de entrega

Comprueba el coste para el destino y servicio elegidos.

Standard Shipping · Estados Unidos: 0,00 US$

Express Shipping · Estados Unidos: 3,99 US$

Ver condiciones
Devolver un artículo

Revisa las condiciones antes de devolver un artículo.

Estados Unidos · Plazo de devolución (días desde la entrega): 30. Método de devolución: Por correo. Gastos de devolución: Paga el vendedor.

Ver condiciones

Customer Reviews (4.6 / 5 · 5 reviews)

Claire M. ★★★★★

Kept a few extras in the glovebox for a stubborn transmission leak, and the 0.546" inner diameter was spot-on for the fitting. These Viton rings handled the heat without swelling, which is more than I can say for the last batch I tried.

Thomas ★★★★★

The 75 durometer feels like a perfect middle ground for my hydraulic fittings—not too stiff, not too soft. I installed a few in a hot water valve and they seal perfectly at 190°F without any leaking.

Ryan O. ★★★★★

Installed these in a hydraulic pump that sees frequent 200°F oil, and the Viton material held up perfectly without any softening. The 0.139" cross-section fit snugly into the groove. Very pleased with the consistent quality across all 75 rings.