Mutual Screw & Supply

Juntas tóricas de Viton FKM de 0,139" CS x 2,859" DI | AS568-233 | Dash 233 | X-Ring | Dureza 70 (10 / Paquete)

Juntas tóricas de Viton FKM de 0,139" CS x 2,859" DI | AS568-233 | Dash 233 | - Main image
$37.42 $56.69 In stock

Juntas tóricas de Viton FKM con diámetro interior de 568-233, 2.859" y sección transversal de 0.139". Rango de servicio de -15°F a +400°F (-26°C a +204°C). También conocidas como FKM, fluoroelastómero.

Especificaciones

  • Tipo de producto: Junta tórica (Junta X)
  • Material: Viton FKM
  • Tamaño de junta AS568: 233
  • Sección transversal: 0.139" (3.53 mm)
  • Diámetro interior: 2.859" (72.62 mm)
  • Dureza: 70 Shore A
  • Rango de temperatura: -15°F a +400°F (-26°C a +204°C)
  • Tipo de medida: Imperial
  • Cantidad por paquete: 10 por paquete
Antes de pagar

Los métodos disponibles y el total final aparecen al pagar.

Cuándo sale el pedido

Cuenta con el tiempo de preparación y de transporte.

Standard Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Express Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Ver condiciones
Solicitar un reembolso

Contacta con la tienda con tu número de pedido para consultar el reembolso.

Consulte el plazo de reembolso antes de devolver el artículo.

Ver condiciones
Costes de entrega

Comprueba el coste para el destino y servicio elegidos.

Standard Shipping · Estados Unidos: 0,00 US$

Express Shipping · Estados Unidos: 3,99 US$

Ver condiciones
Devolver un artículo

Revisa las condiciones antes de devolver un artículo.

Estados Unidos · Plazo de devolución (días desde la entrega): 30. Método de devolución: Por correo. Gastos de devolución: Paga el vendedor.

Ver condiciones

Customer Reviews (5.0 / 5 · 5 reviews)

Aurora E. ★★★★★

Installed these in a high-temp pump that's been eating standard Buna-N rings. The Viton FKM handles the 350°F operating temperature without any sign of hardening. Exactly what I needed for that application.

Richard W. ★★★★★

These seals slid right into the hydraulic cylinder on my press and stopped the slow leak I’d been dealing with. The Viton compound handles the 350°F operating heat without any softening or deformation.

Timothy ★★★★★

Finally got around to replacing the worn seals on my hydraulic manifold, and this 2.859" ID size dropped right in with zero fuss. The Viton material feels noticeably more substantial than the cheap Buna ones I used before, so I'm not worried about it softening near the hot oil lines.