Mutual Screw & Supply

Juntas tóricas Viton FKM 0.21" CS × 2.225" DI | AS568-331 | Dash 331 | X-Ring | 70 Durómetro (8 / Paquete)

Juntas tóricas Viton FKM 0.21" CS × 2.225" DI | AS568-331 | Dash 331 | X-Ring | - Main image
$34.41 $56.41 In stock

Juntas tóricas de Viton FKM en tamaños AS568-331 con diámetro interior de 2.225" y sección transversal de 0.21". Rango de servicio de -15°F a +400°F (-26°C a +204°C). También conocidas como FKM, fluoroelastómero.

Especificaciones

  • Tipo de producto: Junta tórica (Junta X)
  • Material: Viton FKM
  • Tamaño de la junta AS568: 331
  • Sección transversal: 0.21" (5.33 mm)
  • Diámetro interior: 2.225" (56.52 mm)
  • Dureza: 70 Shore A
  • Rango de temperatura: -15°F a +400°F (-26°C a +204°C)
  • Tipo de medida: Imperial
  • Cantidad por paquete: 8 por paquete
Antes de pagar

Los métodos disponibles y el total final aparecen al pagar.

Cuándo sale el pedido

Cuenta con el tiempo de preparación y de transporte.

Standard Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Express Shipping: Preparación (días laborables) 0–1; Transporte (días laborables) 7–15.

Ver condiciones
Solicitar un reembolso

Contacta con la tienda con tu número de pedido para consultar el reembolso.

Consulte el plazo de reembolso antes de devolver el artículo.

Ver condiciones
Costes de entrega

Comprueba el coste para el destino y servicio elegidos.

Standard Shipping · Estados Unidos: 0,00 US$

Express Shipping · Estados Unidos: 3,99 US$

Ver condiciones
Devolver un artículo

Revisa las condiciones antes de devolver un artículo.

Estados Unidos · Plazo de devolución (días desde la entrega): 30. Método de devolución: Por correo. Gastos de devolución: Paga el vendedor.

Ver condiciones

Customer Reviews (4.8 / 5 · 5 reviews)

Richard H. ★★★★★

The X-ring profile seated perfectly in my gland without any twisting, and the 0.21" cross-section feels beefy enough for high-pressure service. I've had these on a hot oil line running at 300°F for three weeks now, and they're holding up way better than the cheap Buna ones I used before.

Samuel W. ★★★★★

The 70 durometer rating on these FKM o-rings gave me the confidence they'd hold up under high heat, and so far they haven't softened or deformed at all. I used them on a steam valve that cycles above 300°F, and the seal is still perfect after a month.

Lily E. ★★★★★

Installed these on a hydraulic fitting that sees constant 300°F heat; the Viton FKM material hasn't softened or cracked after a week of use, and the 70 durometer feels noticeably more robust than standard Buna-N seals.