Mutual Screw & Supply

Accouplement à came et rainure type B 1-1/4" × mâle NPT | Ever-Tite | Aluminium

Accouplement à came et rainure type B 1-1/4" × mâle NPT | Ever-Tite | Aluminium - Main image
$16.21 $22.2 In stock

Cet accouplement à came et rainure de type B 1-1/4" fait partie de la série Ever-Tite Basic 8 (camlock), fabriqué en aluminium. Embout femelle à came avec port fileté mâle NPT. Connexion manuelle sans outil pour un transfert rapide et résistant aux fuites de matériaux à basse pression.

Ever-Tite est la gamme originale premium de raccords à came et rainure — forgée et conçue pour fonctionner sous pression dans des environnements critiques à haute pression où la défaillance n'est pas une option.

  • Marque : Ever-Tite
  • Taille: 1-1/4"
  • Type : Type B (Accouplement x NPT mâle)
  • Matériau: Aluminium
  • Connexion : Came et rainure sans outil (camlock)

Remarque : ne jamais utiliser les raccords à came et rainure pour l'air comprimé ou la vapeur.

Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Chloe T. ★★★★★

Swapped this onto my transfer pump for a 1-1/4" line and the aluminum body feels solid without adding weight. Hand-tightened the cam arms and the male NPT threaded right into my reducer with no tape leaks. Way easier than the barbed setup I was fighting before.

Victoria ★★★★★

Snapped right onto my pump hose and the male NPT side threaded in by hand without any cross-threading. Seals tight with just the cam arms, no Teflon tape needed so far. Aluminum feels solid enough for the transfer job I'm using it for.

Eva T. ★★★★★

The aluminum body is way lighter than the cast iron fitting it replaced, which matters when you're holding a hose up to a tank. Threads on the male NPT end sealed up clean with a bit of tape, and the cam arms snap shut tight with no drip.