Mutual Screw & Supply

Joints toriques Aflas 0,103" CS x 0,799" DI | AS568-117 | Dash 117 | Dureté 80 (40 / Paquet)

Joints toriques Aflas 0,103" CS x 0,799" DI | AS568-117 | Dash 117 | Dureté 80 - Main image
$39.09 $55.06 In stock

Joints toriques Aflas en AS568-117, 0.799" de diamètre intérieur par 0.103" de section. Plage de service -10°F à +450°F (-23°C à +232°C). Également connus sous le nom de TFE/P, FEPM.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Aflas
  • Taille de tiret AS568 : 117
  • Section : 0.103" (2.62 mm)
  • Diamètre intérieur : 0.799" (20.29 mm)
  • Dureté : 80 Shore A
  • Plage de température : -10°F à +450°F (-23°C à +232°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 40 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Olivia ★★★★★

The temperature range on these seals is the real deal—I've had them cycling between hot oil and cold washdowns all week without a single leak. The 80 durometer hardness gives them a solid, stable feel when compressed, and the 0.799" ID matched my groove dimensions spot-on.

Scarlett ★★★★★

These Aflas o-rings fit perfectly in my high-temp manifold application, and the 80 durometer feels just right for the pressure we're dealing with. I've only used about half the pack so far, but they've held up well at 400°F without any softening.

Emily ★★★★★

Used a dozen of these in a steam valve rebuild, they held up fine at 380°F without any swelling. The 80 durometer feels right for a static seal application.