Mutual Screw & Supply

Vis machine #8-32 x 7/8" | Tête bombée, empreinte cruciforme | Nylon (800 / Paquet)

Vis machine #8-32 x 7/8" | Tête bombée, empreinte cruciforme | Nylon (800 / - Main image
$10.08 $15.05 In stock

Ces vis à métaux #8-32 x 7/8" sont fabriquées en nylon, avec une empreinte cruciforme Phillips et une tête bombée. Elles conviennent parfaitement à la fixation de pièces métalliques, panneaux et boîtiers.

  • Matériau et finition : Nylon
  • Empreinte : Phillips
  • Type de tête : Bombée
  • Taille de filetage : #8-32
  • Longueur : 7/8"
  • Applications : Fixation de pièces métalliques, panneaux et boîtiers

Spécifications

  • Type de produit : Vis à métaux
  • Matériau: Nylon
  • Finition : Brute
  • Type de tête : Bombée
  • Type d'empreinte : Phillips
  • Taille de filetage : #8-32
  • Longueur : 7/8"
  • Filets par pouce : 32
  • Système de mesure : Impérial
  • Quantité par paquet : 200 par paquet

Veuillez noter : Cet article est un surplus de stock et est vendu sans possibilité d'annulation, de remboursement ni de retour. Veuillez nous appeler pour toute question avant de commander.

Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.6 / 5 · 5 reviews)

David ★★★★★

Pulled the whole pack out to find every single screw accounted for, and the nylon threads are clean enough that they grip without stripping the plastic standoffs I'm using. Pan heads sit flush on the panel face, and the phillips slots take a driver without camming out. Exactly what I needed for a no

Ellie Q. ★★★★★

Used a handful of these nylon screws to secure a few loose electrical components inside a metal enclosure, and they held tight without any stripping. The phillips drive bit in perfectly and the 7/8" length was just right for the job.

Scarlett ★★★★★

I’ve been using these nylon screws for mounting terminal blocks in a control panel, and they’re noticeably lighter than metal ones. The Phillips drive seated nicely without stripping, which was a relief.