Mutual Screw & Supply

Joints toriques PTFE 0,103" CS × 0,299" DI | AS568-109 | Dash 109 | Dureté 10 (75/paquet)

Joints toriques PTFE 0,103" CS × 0,299" DI | AS568-109 | Dash 109 | Dureté 10 - Main image
$46.64 $65.69 In stock

Joints toriques PTFE avec diamètre intérieur AS568-109, 0.299" et section de 0.103". Plage de service -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de trait AS568 : 109
  • Section : 0.103" (2.62 mm)
  • Diamètre intérieur : 0.299" (7.59 mm)
  • Dureté : 10 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 75 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.2 / 5 · 5 reviews)

Emma ★★★★★

Swapping out my old Viton seals for these PTFE rings made a noticeable difference in the high-temp oven valve—the 0.103" cross-section fits perfectly and no more sticking.

Hannah O. ★★★★★

Needed a super low-friction seal for a high-temp pneumatic line, and these 10 durometer PTFE rings fit the bill perfectly. The 0.103" cross-section feels sturdy, and the -350°F to +500°F range covers everything I throw at them.

Adam O. ★★★★☆

Used these in a cryogenic application down to -300°F and they sealed perfectly without cracking. The PTFE material is noticeably stiffer than rubber, which made installation a bit tricky, but once seated they hold up really well.