Mutual Screw & Supply

Joints toriques PTFE CS 0.103" × ID 1.986" | AS568-136 | Dash 136 | Dureté 13 (30/paquet)

Joints toriques PTFE CS 0.103" × ID 1.986" | AS568-136 | Dash 136 | Dureté 13 - Main image
$35.44 $57.16 In stock

Joints toriques en PTFE avec diamètre intérieur de 568-136, 1.986" et section de 0.103". Plage de service de -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de trait AS568 : 136
  • Section : 0.103" (2.62 mm)
  • Diamètre intérieur : 1.986" (50.44 mm)
  • Dureté : 13 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 30 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Grace ★★★★★

The temperature range is what sold me—my application fluctuates between cryogenic and hot, and these PTFE rings haven’t cracked or deformed in three months of cycling. The 1.986" ID fit my groove perfectly on the first try, and the 13 durometer gives them just enough give to seat without squishing o

Sofia I. ★★★★★

I needed a seal that could handle extreme temperatures, and these PTFE o-rings work perfectly in my cryogenic setup. The 13 durometer is soft enough to seat without leaking.

John N. ★★★★★

These o-rings handled the extreme heat in our industrial oven much better than the standard rubber ones we tried before. The PTFE material feels dense and well-formed, exactly the right size for our application.