Mutual Screw & Supply

Joints toriques PTFE 0,139" CS x 0,796" DI | AS568-211 | Dash 211 | Dureté 21 (50 / Paquet)

Joints toriques PTFE 0,139" CS x 0,796" DI | AS568-211 | Dash 211 | Dureté 21 - Main image
$43.21 $58.39 In stock

Joints toriques PTFE en taille AS568-211, 0.796" de diamètre intérieur par 0.139" de section. Plage de service -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de référence AS568 : 211
  • Section : 0.139" (3.53 mm)
  • Diamètre intérieur : 0.796" (20.22 mm)
  • Dureté : 21 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 50 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Abigail ★★★★★

The chemical resistance of these PTFE rings is exactly what I needed for a harsh solvent application. They installed easily and have held their seal perfectly after several thermal cycles from -100°F to 300°F.

Timothy ★★★★★

Finally, o-rings that don't deform after a hot oil bath — the PTFE holds up exactly as promised at 500°F. The 21-durometer feel is just pliable enough to seat perfectly in my sealing groove without being flimsy.

Kevin S. ★★★★★

Used these to seal a vacuum chamber fitting and they held perfectly down to 5 microns, which I honestly didn’t expect from PTFE. The -350°F temp range gives me confidence for cryo experiments I’ve got planned next month.