Mutual Screw & Supply

Joints toriques PTFE 0,139" CS x 0,921" DI | AS568-213 | Dash 213 | 21 Dureté (50/Paquet)

Joints toriques PTFE 0,139" CS x 0,921" DI | AS568-213 | Dash 213 | 21 Dureté - Main image
$37.37 $58.39 In stock

Joints toriques PTFE avec diamètre intérieur AS568-213, 0.921" et section transversale 0.139". Plage de service de -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de dash AS568 : 213
  • Section transversale : 0.139" (3.53 mm)
  • Diamètre intérieur : 0.921" (23.39 mm)
  • Dureté : 21 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 50 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Daniel V. ★★★★★

The 0.139" cross-section seats perfectly in our high-temp clamp, sealing tight at 400°F without any deformation like cheaper polymer rings.

Emily ★★★★★

These handled the heat in our drying oven without any warping or sticking, which is exactly what I needed. The -350°F to +500°F range gives me confidence they'll last through any process I throw at them. Fit the groove perfectly on the first try.

Zoe ★★★★★

The 21 durometer is surprisingly pliable for a PTFE seal, making it much easier to work into a tight groove than the harder ones I've used before. I've had it on a high-temp flange for two months now without any leaks. It handled the -350°F cryogenic test in my lab without cracking, which is exactl