Mutual Screw & Supply

Joints toriques PTFE 0.139" CS X 0.984" DI | AS568-214 | Dash 214 | Dureté 21 (35 / Pqt.)

Joints toriques PTFE 0.139" CS X 0.984" DI | AS568-214 | Dash 214 | Dureté 21 - Main image
$37.17 $51.63 In stock

Joints toriques en PTFE dans les tailles AS568 à AS214, 0.984 pouces de diamètre intérieur par 0.139 pouces de section. Plage de service de -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de référence AS568 : 214
  • Section : 0.139 pouces (3.53 mm)
  • Diamètre intérieur : 0.984 pouces (24.99 mm)
  • Dureté : 21 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 35 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Lily F. ★★★★★

Installed these Dash 214 o-rings in a high-temp steam valve and they handled 400°F without any softening. The 21 durometer is noticeably pliable, which made seating them into the groove much easier than harder PTFE seals I've used.

Sebastian ★★★★★

I appreciate how these PTFE o-rings kept their flexibility even after I torqued them down in a cryogenic fitting. The 21 durometer is noticeably softer than standard Teflon, which made seating them much easier.

Emily ★★★★★

The softness surprised me for a PTFE ring — the 21 durometer rating really makes them flexible enough to seat easily in a tight groove. I used these for a high-temp seal and the fit was spot-on out of the package.