Mutual Screw & Supply

Joints toriques PTFE 0.139" CS x 2.109" DI | AS568-227 | Dash 227 | Dureté 22 (25 / Pqt.)

Joints toriques PTFE 0.139" CS x 2.109" DI | AS568-227 | Dash 227 | Dureté 22 - Main image
$33.98 $55.7 In stock

Joints toriques PTFE en AS568-227, 2.109" de diamètre intérieur par 0.139" de section. Plage de service -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de trait AS568 : 227
  • Section : 0.139" (3.53 mm)
  • Diamètre intérieur : 2.109" (53.57 mm)
  • Dureté : 22 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 25 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Leo ★★★★★

That -350°F to +500°F range is exactly what I needed for a high-temp seal on a hot oil line. The 22 durometer PTFE feels firmer than rubber but still seated into the groove without any struggle.

Eva ★★★★★

These o-rings are surprisingly flexible for PTFE — the 22 durometer makes them easy to seat in tight grooves, and the temperature range from -350°F to +500°

Claire F. ★★★★★

Finally found o-rings that resist melting near our high-temp lab oven, and the 22 durometer PTFE is stiff enough to seal without cracking. The -350°F to +500°F rating gives me confidence for both cryo and heat cycles. These 2.109" ID rings fit perfectly on our flanged fittings.