Mutual Screw & Supply

Joints toriques PTFE 0.139" CS × 2.359" DI | AS568-229 | Dash 229 | Dureté 22 (14/paquet)

Joints toriques PTFE 0.139" CS × 2.359" DI | AS568-229 | Dash 229 | Dureté 22 - Main image
$35.62 $51.63 In stock

Joints toriques PTFE en tailles AS568-229, diamètre intérieur 2.359" et section 0.139". Plage de service -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de référence AS568 : 229
  • Section : 0.139" (3.53 mm)
  • Diamètre intérieur : 2.359" (59.92 mm)
  • Dureté : 22 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 14 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Thomas ★★★★★

The soft 22 durometer is what sold me—these aren't stiff like typical PTFE, so they seat nicely without fighting them into the groove. I've used them for a cryo fitting that sees constant thermal cycling and they've held their seal perfectly so far.

John ★★★★★

The wide -350°F to +500°F range was the deciding factor for me, and the 22 durometer feels reassuringly pliable for a PTFE seal. The 14-piece pack gives a good buffer for trial fits, and the precision of the 2.359" ID has been spot-on so far.

Olivia ★★★★★

These seals handled the cryogenic temps in my liquid nitrogen setup without any sign of brittleness or leaks. The 22 durometer flexibility made installation a breeze even on the tight flange.