Mutual Screw & Supply

Joints toriques PTFE | 0.139" EC × 2.484" DI | AS568-230 | Dash 230 | Dureté 23 (14 / Paquet)

Joints toriques PTFE | 0.139" EC × 2.484" DI | AS568-230 | Dash 230 | Dureté 23 - Main image
$35.11 $51.63 In stock

Joints toriques PTFE en AS568-230, 2.484" de diamètre intérieur par 0.139" de section. Plage de service -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de référence AS568 : 230
  • Section : 0.139" (3.53 mm)
  • Diamètre intérieur : 2.484" (63.09 mm)
  • Dureté : 23 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 14 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.2 / 5 · 5 reviews)

Sophia ★★★★★

The softer 23 durometer PTFE was the key for me—it sealed a stubborn hydraulic fitting that harder o-rings couldn't handle. These handled the -350°F cryogenic test in our lab without any cracking.

Timothy ★★★★★

Finally, a Dash 230 that actually holds up at the sub-zero temps I work with—these PTFE rings don't get brittle like the rubber ones did. The 23 durometer is noticeably stiffer but seals perfectly in my cryogenic valve.

John ★★★★★

I've been using these PTFE o-rings for a high-temp sealing application, and the 23 durometer is surprisingly pliable for a Teflon material—they seated perfectly without any cracking. The -350°F to +500°F range gives me confidence they'll hold up in extreme conditions. Definitely worth the price for