Mutual Screw & Supply

Joints toriques PTFE 0,139" CS x 2,734" DI | AS568-232 | Dash 232 | Dureté 23 (12 / Pqt.)

Joints toriques PTFE 0,139" CS x 2,734" DI | AS568-232 | Dash 232 | Dureté 23 - Main image
$32.76 $52 In stock

Joints toriques en PTFE avec un diamètre intérieur de 568-232, 2.734" et une section transversale de 0.139". Plage de service de -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de trait AS568 : 232
  • Section transversale : 0.139" (3.53 mm)
  • Diamètre intérieur : 2.734" (69.44 mm)
  • Dureté : 23 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 12 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.6 / 5 · 5 reviews)

Jacob W. ★★★★★

The 23 durometer PTFE is noticeably softer than standard Teflon, which made installation in a tight vacuum port much easier. Handles repeated thermal cycling from liquid nitrogen to 400°F without any visible wear.

John ★★★★★

For a high-temp application in a lab furnace, these PTFE o-rings held up perfectly at 450°F without any softening. The 23 durometer feels surprisingly firm yet still seals nicely against the groove. Exactly what I needed for a static seal.

Elizabeth Y. ★★★★★

The temperature range is what sold me—needing something that holds up at -350°F is rare, and these fit perfectly on the flange. The 23 durometer PTFE feels firmer than rubber but seals without fighting you. I've already ordered a second pack.