Mutual Screw & Supply

Joints toriques PTFE 0,139" CS × 2,984" DI | AS568-234 | Dash 234 | Dureté 23 (12 / Paquet)

Joints toriques PTFE 0,139" CS × 2,984" DI | AS568-234 | Dash 234 | Dureté 23 - Main image
$36.58 $57.16 In stock

Joints toriques en PTFE avec diamètre intérieur de 568-234, 2.984" et section transversale de 0.139". Plage de service de -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de référence AS568 : 234
  • Section transversale : 0.139" (3.53 mm)
  • Diamètre intérieur : 2.984" (75.79 mm)
  • Dureté : 23 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 12 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Natalie X. ★★★★★

The temperature range on these is what sold me—handling -350°F to +500°F means I don't have to worry about them degrading in my cryo setup. They're stiff as expected for PTFE, but the 23 durometer gives just enough flex to seat properly without cracking.

Eli ★★★★★

These o-rings fit perfectly into the high-temp seal I needed to rebuild, handling up to 500°F without any issue. The 23 durometer is noticeably softer than standard PTFE, which made installation far easier than I expected for this size.

Abigail ★★★★★

Finally got around to installing these in a high-temp manifold and the -350 to +500 range gives me real peace of mind. The 23 durometer is noticeably more flexible than the standard 75 Shore PTFE I’ve used before, which made seating them into the groove a breeze.