Mutual Screw & Supply

Joints toriques PTFE 0,139" CS x 3,484" DI | AS568-238 | Dash 238 | Dureté 23 (10 / Paquet)

Joints toriques PTFE 0,139" CS x 3,484" DI | AS568-238 | Dash 238 | Dureté 23 - Main image
$32.2 $51.94 In stock

Joints toriques en PTFE avec diamètre intérieur AS568-238, 3.484" et section de 0.139". Plage de service -350°F à +500°F (-212°C à +260°C). Également appelés Téflon, Polytétrafluoroéthylène.

Spécifications

  • Tye de produit: Jint torique
  • Matériau: PTFE
  • Taille de trait AS568: 238
  • Section: 0.139" (3.53 mm)
  • Diètre intérieur: 3.484" (88.49 mm)
  • Dureté: 23 Shore A
  • Plage de tempéature: -350°F à +500°F (-212°C à +260°C)
  • Tye de mesure: Impérial
  • Quantité par paquet: 10 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Brian C. ★★★★★

I needed a chemical-resistant seal for a high-temp valve rebuild, and the 23 durometer PTFE is rigid enough to hold shape under compression but still seats properly. The package of ten gives me spares for future maintenance, which is convenient.

Carter G. ★★★★★

The -350°F low-end rating gives me peace of mind for our cryo setup, and the 23-durometer softness makes them seal nicely on worn flanges. I've already reordered a second pack.

Adam ★★★★★

These 23-durometer PTFE o-rings are noticeably softer than standard Teflon seals, which made installation into a tight gland much easier without cracking. The 3.484" inner diameter was a perfect fit for my high-temp application up to 500°F.