Mutual Screw & Supply

Joints toriques PTFE 0,139" CS x 3,859" DI | AS568-241 | Dash 241 | Dureté 24 (8 / Paquet)

Joints toriques PTFE 0,139" CS x 3,859" DI | AS568-241 | Dash 241 | Dureté 24 - Main image
$37.78 $55.56 In stock

Joints toriques PTFE avec diamètre intérieur 568 - 241, 3.859" et section transversale 0.139". Plage de service -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille AS568 : 241
  • Section transversale : 0.139" (3.53 mm)
  • Diamètre intérieur : 3.859" (98.02 mm)
  • Dureté : 24 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 8 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Stella ★★★★★

These PTFE o-rings held up perfectly in a high-temp application where standard rubber would have melted. The 500°F rating is no joke—installed them a few weeks ago and they're still sealing tight with zero deformation.

Richard ★★★★★

I was worried the 24 durometer would be too soft, but these PTFE o-rings seal perfectly in my hydraulic manifold. The -350°F to +500°F rating gives me confidence for extreme applications.

Isabella W. ★★★★★

Installed these in a cryogenic valve and they've held perfectly at -300°F without any cracking. The 24 durometer PTFE is way more flexible than I expected for a Teflon seal, yet still firm enough to keep its shape under pressure.