Mutual Screw & Supply

Joints toriques PTFE 0.139" CS × 4.109" DI | AS568-243 | Dash 243 | Dureté 24 (125 / paquet)

Joints toriques PTFE 0.139" CS × 4.109" DI | AS568-243 | Dash 243 | Dureté 24 - Main image
$42.99 $57.32 In stock

Joints toriques en PTFE en AS568-243, 4.109" de diamètre intérieur par 0.139" de section. Plage de service de -350°F à +500°F (-212°C à +260°C). Également connu sous le nom de téflon, polytétrafluoroéthylène.

Spécifications

  • Type de produit : Joint torique
  • Matériau: PTFE
  • Taille de référence AS568 : 243
  • Section : 0.139" (3.53 mm)
  • Diamètre intérieur : 4.109" (104.37 mm)
  • Dureté : 24 Shore A
  • Plage de température : -350°F à +500°F (-212°C à +260°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 125 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Matthew H. ★★★★★

I needed a high-temp seal for a valve stem, and these PTFE rings handled the 400°F steam without any deformation. The 24 durometer is soft enough to seat perfectly but firm enough to hold pressure tight.

Lily ★★★★★

These o-rings have been working perfectly in our high-temp steam lines, the -350°F to +500°F range is exactly what we needed. They sealed tight on the first try and show no signs of wear after two weeks.

Sebastian Q. ★★★★★

Finally, an o-ring that handles my cryo line without getting brittle—the -350°F rating matched exactly what I needed. The 24 durometer is noticeably softer than standard PTFE, which made seating it in the groove a breeze.