Mutual Screw & Supply

8337-B-0440 | Entretoises rondes Amatom #4-40 × 5/8" | Laiton (100 / Paquet)

8337-B-0440 | Entretoises rondes Amatom #4-40 × 5/8" | Laiton (100 / Paquet) - Main image
$41.34 $63.6 In stock

Ces entretoises rondes #4-40 x 5/8" sont fabriquées en laiton. Elles conviennent parfaitement pour l'espacement et le montage de cartes de circuits imprimés et de panneaux.

  • Matériau et finition : Laiton
  • Taille du filetage : #4-40
  • Longueur : 5/8"
  • Applications : Espacement et montage de cartes de circuits imprimés et de panneaux

Spécifications

  • Type de produit : Entretoises rondes
  • Matériau: Laiton
  • Taille du filetage : #4-40
  • Longueur : 5/8"
  • Filets par pouce : 40
  • Type de mesure : Impérial
  • Quantité par paquet : 100 par paquet

Veuillez noter : Cet article est un surplus de stock et est vendu sans possibilité d'annulation, de remboursement ni de retour. Veuillez nous appeler pour toute question concernant cet article avant de commander.

Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.6 / 5 · 5 reviews)

Violet ★★★★★

The threads cut cleanly on these brass standoffs, so they screwed into my panel without any binding. Used them to lift a small circuit board off the chassis, and the 5/8" length gave me just the right clearance.

Christopher O. ★★★★★

The brass finish on these standoffs gives them a clean, professional look that stands out from the usual steel ones. I installed them to space out a pair of circuit boards in a small enclosure, and the 5/8" length worked perfectly for the gap I needed. The threads were clean and engaged smoothly wit

John ★★★★★

These brass standoffs fit the #4-40 screws I had perfectly, and the 5/8 inch length was exactly right for spacing my circuit board off the mounting plate. The threading was clean and caught without any cross-threading issues.