Mutual Screw & Supply

Joints toriques silicone 0,07" CS x 4,239" DI | AS568-046 | Dash 046 | Conforme FDA | Dureté 70 | Rouge (50/sachet)

Joints toriques silicone 0,07" CS x 4,239" DI | AS568-046 | Dash 046 | Conforme - Main image
$34.59 $50.87 In stock

Joints toriques en silicone en AS568-046, 4.239" de diamètre intérieur par 0.07" de section. Plage de service -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de trait AS568 : 046
  • Section : 0.07" (1.78 mm)
  • Diamètre intérieur : 4.239" (107.67 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 50 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.6 / 5 · 5 reviews)

Christopher ★★★★★

These replaced the old black ones in a high-temp gasket application and they’re holding up perfectly at +400°F. The 70 durometer is exactly right for the seal I needed—not too soft, not too stiff.

Thomas W. ★★★★★

The red color makes them easy to spot when I’m digging through my toolbox, and the 70 durometer gives just the right amount of flex without feeling flimsy. I’ve used them in a few high-heat setups up to 400°F and they’ve held their shape perfectly.

Jacob U. ★★★★★

The high-temp rating is what sold me, and after sitting near a hot engine block for a week they haven't cracked or deformed. The red color also makes them easy to spot during maintenance.