Mutual Screw & Supply

Joints toriques en silicone 0.103" CS x 0.237" DI | AS568-108 | Dash 108 | Conforme FDA | Dureté 70 | Rouge (400/paquet)

Joints toriques en silicone 0.103" CS x 0.237" DI | AS568-108 | Dash 108 | - Main image
$35.04 $57.45 In stock

Joints toriques en silicone de diamètre intérieur 568-108-0.237" et de section 0.103". Plage de service de -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de dash AS568 : 108
  • Section transversale : 0.103" (2.62 mm)
  • Diamètre intérieur : 0.237" (6.02 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 400 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.2 / 5 · 5 reviews)

Leo ★★★★★

The 0.103" cross-section is noticeably thicker than my old gaskets, and they slipped into the groove without any binding. I've used a few to seal a hot water valve, and they haven't shown any sign of softening at 200°F.

Matthew X. ★★★★★

I've been using these for high-temp sealing on a food-grade pump, and the red silicone handles constant 400°F steam without any degradation. The 70 durometer gives just the right flexibility for a snug fit, and the pack of 400 is more than enough for future repairs.

John ★★★★☆

I’ve been using these for a few weeks now and the high-temp silicone material holds up well under my espresso machine’s steam wand. The 70 durometer is a nice balance—firm enough to seal but not too stiff to install.