Mutual Screw & Supply

Joints toriques en silicone 0,139" CS x 9,484" DI | AS568-274 | Dash 274 | Conforme FDA | Dureté 70 | Rouge (11 / Paquet)

Joints toriques en silicone 0,139" CS x 9,484" DI | AS568-274 | Dash 274 | - Main image
$33.35 $54.68 In stock

Joints toriques en silicone de diamètre intérieur AS568-274, 9.484 pouces et section de 0.139 pouce. Plage de service de -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de trait AS568 : 274
  • Section : 0.139 pouce (3.53 mm)
  • Diamètre intérieur : 9.484 pouce (240.89 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 11 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.6 / 5 · 5 reviews)

Avery G. ★★★★★

Took a chance on these for a high-heat application and the -80°F to +450°F range is exactly why I bought them. The red silicone feels dense and quality, and the 9.484" ID fits my flange perfectly with no stretching or deformation.

Natalie X. ★★★★★

The 0.139" cross-section on these seals is noticeably more forgiving than the hard rubber ones I'd been using. They slipped right into the groove on my steam kettle and held pressure perfectly during the first test at 350°F. This pack of eleven should last me through quite a few maintenance rounds.

Victoria X. ★★★★★

Finally found a silicone o-ring that can handle my high-temp brewing setup. The 0.139" cross-section fit perfectly into the groove, and the bright red color makes it easy to spot during cleaning.