Mutual Screw & Supply

Joints toriques silicone | CS 0.139" × DI 9.984" | AS568-276 | Dash 276 | Conforme FDA | Dureté 70 | Rouges (10 / Pqt.)

Joints toriques silicone | CS 0.139" × DI 9.984" | AS568-276 | Dash 276 | - Main image
$31.28 $51.28 In stock

Joints toriques en silicone de diamètre intérieur 568 - 276, 9.984" de diamètre intérieur × 0.139" de section. Plage de service -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de trait AS568 : 276
  • Section : 0.139" (3.53 mm)
  • Diamètre intérieur : 9.984" (253.59 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 10 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Stella ★★★★★

Exactly what I needed to seal a stubborn vacuum chamber port that kept leaking with standard black rings. The -80°F to +450°F range gives me confidence for the hot oil bath cycles I run, and the 70 durometer feels firm but not too stiff to install.

Ruby ★★★★★

The bright red color makes them easy to spot during maintenance, and the -80°F to +450°F range gives me peace of mind for hot fluid lines. Fit was snug on the 10-inch flange right out of the package, no stretching or fighting needed.

Scarlett ★★★★★

The temperature range on these is what sold me—I needed something that could handle steam without breaking down, and they've held up perfectly so far. The red color makes them easy to spot during assembly too, which is a nice bonus.