Mutual Screw & Supply

Joints toriques silicone 0.21" CS x 0.599" ID | AS568-312 | Dash 312 | Conforme FDA | 70 Duro | Rouge (150/Pqt)

Joints toriques silicone 0.21" CS x 0.599" ID | AS568-312 | Dash 312 | Conforme - Main image
$38.46 $51.97 In stock

Joints toriques en silicone de diamètre intérieur AS568-312, 0.599" et de section 0.21". Plage de service de -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de trait AS568 : 312
  • Section : 0.21" (5.33 mm)
  • Diamètre intérieur : 0.599" (15.21 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 150 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Brian ★★★★★

The high-temp range on these is no joke—they held up perfectly on my smoker, which hits over 400°F. Also, the 70-durometer red silicone feels just firm enough without being brittle.

Edward ★★★★★

Replaced the old cracked seals on my pressure cooker with these and they seated perfectly right out of the bag. That red color makes them easy to spot during disassembly, and the 70 durometer feels firm but forgiving. Handling the -80°F rating gives me peace of mind for my freezer experiments.

Riley ★★★★★

Installed these in a high-temp pump application and they handled the heat without any visible wear after a month. The 70 durometer feels just right for a tight seal without being too stiff to work with.