Mutual Screw & Supply

Joints toriques silicone | CS 0.21" x DI 1.037" | AS568-319 | Dash 319 | Conforme FDA | Dureté 70 | Rouge (80/Paquet)

Joints toriques silicone | CS 0.21" x DI 1.037" | AS568-319 | Dash 319 | - Main image
$33.22 $51.9 In stock

Joints toriques en silicone de diamètre intérieur AS568-319, 1.037" et de section 0.21". Plage de service de -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de trait AS568 : 319
  • Section : 0.21" (5.33 mm)
  • Diamètre intérieur : 1.037" (26.34 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 80 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Eva H. ★★★★★

I've been using these red silicone o-rings for a high-heat application near my oven, and the 70 durometer feels just right—not too stiff, not too soft. The 1.037" inner diameter fits perfectly on my existing fitting without any stretching.

Ava N. ★★★★★

I’d been struggling with standard black o-rings not sealing properly under my hot water pump, so switching to these made a night-and-day difference—the 70 durometer feels firm yet flexible. The 1.037” inner diameter slid onto the fitting perfectly, and the red color makes inspecting for cracks way f

Andrew ★★★★★

The red color makes them easy to spot during installation, and the 70 durometer feels just right for a snug seal without being too stiff. I’ve used them on a home brewing setup where the FDA compliance was a must, and they’ve held up perfectly under steam.