Mutual Screw & Supply

Joints toriques en silicone 0,21" CS X 12,975" ID | AS568-379 | Dash 379 | Conforme FDA | 70 Dureté | Rouge (8 / Paq.)

Joints toriques en silicone 0,21" CS X 12,975" ID | AS568-379 | Dash 379 | - Main image
$32.54 $53.35 In stock

Joints toriques en silicone avec diamètre intérieur de 12.975" et section de 0.21". Plage de service de -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de tiret AS568 : 379
  • Section : 0.21" (5.33 mm)
  • Diamètre intérieur : 12.975" (329.56 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 8 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Joseph ★★★★★

I needed something that could handle high heat for a commercial sealing project, and these red silicone rings fit the bill perfectly. The 70 durometer feels just right — firm enough to hold a seal but not too stiff to install.

William ★★★★★

Finally, a 12.975" ID ring that actually seals without me having to wrestle it on with tools. The 70 durometer gives just the right squish, and these red ones are easy to spot when I'm swapping parts. Replacing the old batch with these was a twenty-minute job, and so far, zero leaks at our standard

Penelope ★★★★★

These handled the 230°F heat cycling on my custom gasket setup without any visible wear or hardening. The 70 durometer strikes a nice balance—firm enough to hold a seal, soft enough to deform and seat properly.