Mutual Screw & Supply

Joints toriques silicone 0,21" CS x 14,975" DI | AS568-383 | Dash 383 | Conforme FDA | Dureté 70 | Rouge (5/sachet)

Joints toriques silicone 0,21" CS x 14,975" DI | AS568-383 | Dash 383 | - Main image
$35.72 $53.32 In stock

Joints toriques en silicone en AS568-383, diamètre intérieur 14.975" et section 0.21". Plage de service -80°F à +450°F (-62°C à +232°C). Également connus sous le nom de VMQ, Silastic.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Silicone
  • Taille de trait AS568 : 383
  • Section : 0.21" (5.33 mm)
  • Diamètre intérieur : 14.975" (380.36 mm)
  • Dureté : 70 Shore A
  • Couleur : Rouge
  • Plage de température : -80°F à +450°F (-62°C à +232°C)
  • Type de mesure : Impérial
  • Conformité : FDA 21 CFR 177.2600
  • Quantité par paquet : 5 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

David L. ★★★★★

The 14.975" inner diameter fit my flange perfectly on the first try, and the 70 durometer feels sturdy yet flexible when stretched into place. I've used cheaper o-rings before that hardened after a few heat cycles, but these held up fine at 300°F in my setup. The red tint is a nice bonus for quick v

Nicholas ★★★★★

The red color makes them easy to spot during assembly, which saved me time when checking the seal on a big flange. The 70 durometer feels firm yet flexible, and they slipped into the groove without any twisting or rolling.

Joseph N. ★★★★★

These are holding up perfectly in a high-temp steam application where cheaper seals failed in weeks. The 70 durometer gives them enough flex to seat easily without being floppy. Great fit on a 15-inch flange.