Mutual Screw & Supply

Joints toriques Viton FKM 0.103" CS × 2.799" DI | AS568-149 | Dash 149 | Dureté 75 | Marron (50/Paq.)

Joints toriques Viton FKM 0.103" CS × 2.799" DI | AS568-149 | Dash 149 | Dureté - Main image
$38.69 $59.52 In stock

Joints toriques Viton FKM en taille AS568-149-2.799" de diamètre intérieur par 0.103" de section. Plage de service -15°F à +400°F (-26°C à +204°C). Également connu sous le nom de FKM, fluoroélastomère.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Viton FKM
  • Taille de raccord AS568 : 149
  • Section transversale : 0.103" (2.62 mm)
  • Diamètre intérieur : 2.799" (71.09 mm)
  • Dureté : 75 Shore A
  • Couleur : Marron
  • Plage de température : -15°F à +400°F (-26°C à +204°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 50 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Evelyn U. ★★★★★

The cross-section is exactly 0.103 inches, so they seated perfectly in the groove without any tweaking. I've got them holding up in a chemical washdown area and they haven't swollen or cracked in the two months since install.

Sophia F. ★★★★★

These o-rings handled the 300°F heat cycle without any softening or deformation, which is exactly what I needed for my hydraulic setup. The 75 durometer feels firm but still seals nicely against the flange.

Aurora L. ★★★★★

I was worried about finding the right size for a high-temp application, but these 2.799" ID Viton o-rings are exactly what I needed. The 75 durometer brown material feels robust and they handled the heat without any issues.