Mutual Screw & Supply

Joints toriques Viton FKM 0,139" CS x 1,171" DI | AS568-217 | Dash 217 | X-Ring | Dureté 70 (30 / Paquet)

Joints toriques Viton FKM 0,139" CS x 1,171" DI | AS568-217 | Dash 217 | X-Ring - Main image
$39.95 $53.98 In stock

Joints toriques Viton FKM avec diamètre intérieur 568 × 217, 1.171 pouces et section transversale de 0.139 pouces. Plage de service de -15°F à +400°F (-26°C à +204°C). Également connu sous le nom de FKM, fluoroélastomère.

Spécifications

  • Type de produit : Joint torique (joint X)
  • Matériau: Viton FKM
  • Taille de raccord AS568 : 217
  • Section transversale : 0.139" (3.53 mm)
  • Diamètre intérieur : 1.171" (29.74 mm)
  • Dureté : 70 Shore A
  • Plage de température : -15°F à +400°F (-26°C à +204°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 30 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.4 / 5 · 5 reviews)

Elizabeth A. ★★★★★

I use these for a high-temp hydraulic seal, and the Viton FKM material holds up perfectly where standard Buna would fail. The 70 durometer is firm enough to seat properly without being too stiff. Exactly the size I needed for a tight 1.171" ID fit.

Zoe ★★★★★

Needed to replace a seal on a high-temp valve and these Viton o-rings handled it perfectly. The 0.139" cross-section made for a snug, leak-free fit where standard rubber ones always failed.

Owen A. ★★★★★

These o-rings fit perfectly in the hydraulic valve I was rebuilding, and the Viton material handled the high heat without any softening. The 70 durometer feels just right for the application, and the package of 30 gives me plenty of spares.