Mutual Screw & Supply

Joints toriques Viton FKM 0,139" CS x 2,859" DI | AS568-233 | Dash 233 | X-Ring | Dureté 70 (10 / Paquet)

Joints toriques Viton FKM 0,139" CS x 2,859" DI | AS568-233 | Dash 233 | X-Ring - Main image
$37.42 $56.69 In stock

Joints toriques Viton FKM avec diamètre intérieur de 568-233, 2.859" et section transversale de 0.139". Plage de service de -15°F à +400°F (-26°C à +204°C). Également connus sous le nom de FKM, fluoroélastomère.

Spécifications

  • Type de produit : Joint torique (Joint X)
  • Matériau: Viton FKM
  • Taille de joint AS568 : 233
  • Section transversale : 0.139" (3.53 mm)
  • Diamètre intérieur : 2.859" (72.62 mm)
  • Dureté : 70 Shore A
  • Plage de température : -15°F à +400°F (-26°C à +204°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 10 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Aurora E. ★★★★★

Installed these in a high-temp pump that's been eating standard Buna-N rings. The Viton FKM handles the 350°F operating temperature without any sign of hardening. Exactly what I needed for that application.

Richard W. ★★★★★

These seals slid right into the hydraulic cylinder on my press and stopped the slow leak I’d been dealing with. The Viton compound handles the 350°F operating heat without any softening or deformation.

Timothy ★★★★★

Finally got around to replacing the worn seals on my hydraulic manifold, and this 2.859" ID size dropped right in with zero fuss. The Viton material feels noticeably more substantial than the cheap Buna ones I used before, so I'm not worried about it softening near the hot oil lines.