Mutual Screw & Supply

Joints toriques Viton FKM 0.21" CS X 1.224" DI | AS568-322 | Dash 322 | Dureté 75 Shore | Marron (40 / Paquet)

Joints toriques Viton FKM 0.21" CS X 1.224" DI | AS568-322 | Dash 322 | Dureté - Main image
$36.58 $59.96 In stock

Joints toriques Viton FKM avec diamètre intérieur AS568-322, 1.224 pouces et section transversale 0.21 pouces. Plage de service -15°F à +400°F (-26°C à +204°C). Également connu sous le nom de FKM, fluoroélastomère.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Viton FKM
  • Taille de joint AS568 : 322
  • Section transversale : 0.21" (5.33 mm)
  • Diamètre intérieur : 1.224" (31.09 mm)
  • Dureté : 75 Shore A
  • Couleur : Marron
  • Plage de température : -15°F à +400°F (-26°C à +204°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 40 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.4 / 5 · 5 reviews)

Richard C. ★★★★★

Needed these for a high-temp seal that kept failing, and the 400°F rating finally held up under steam. The brown color makes them easy to spot during inspection, and all 40 arrived uniform with no burrs or imperfections.

Natalie I. ★★★★★

The 0.21" cross-section on these is noticeably thicker than the old ones I was using, which means a much tighter seal on my hydraulic fittings. I've had them in a hot oil bath at 200°C for a few weeks now with zero leaks.

Thomas D. ★★★★★

These o-rings handled 350°F steam in my pressure rig without any softening at all. The brown color makes them easy to spot against black metal parts, and the 75 durometer feels just right for a snug seal.