Mutual Screw & Supply

Joints toriques Viton FKM | CS 0.21" x DI 3.225" | AS568-339 | Dash 339 | Dureté 75 | Marron (20 / Paquet)

Joints toriques Viton FKM | CS 0.21" x DI 3.225" | AS568-339 | Dash 339 | - Main image
$39.63 $66.05 In stock

Joints toriques Viton FKM en taille AS568-339, diamètre intérieur de 3.225 pouces par section de 0.21 pouces. Plage de service de -15°F à +400°F (-26°C à +204°C). Également connu sous le nom de FKM, fluoroélastomère.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Viton FKM
  • Taille de joint AS568 : 339
  • Section transversale : 0.21" (5.33 mm)
  • Diamètre intérieur : 3.225" (81.91 mm)
  • Dureté : 75 Shore A
  • Couleur : Marron
  • Plage de température : -15°F à +400°F (-26°C à +204°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 20 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.8 / 5 · 5 reviews)

Brian ★★★★★

Ordered these for a high-temp seal in a compressor, and the -15°F to +400°F range handles the cycling perfectly. The 0.21" cross-section fit snugly into the groove without any struggle.

Matthew ★★★★★

The 75 durometer rating is perfect for my high-temp pneumatic seals, and the brown color makes them easy to spot against the metal. They fit snugly into the groove without any deformation, and the package of 20 will last me a while.

Owen ★★★★★

I used these to replace worn seals on a hydraulic fitting that sees constant 300°F heat—the Viton material holds up perfectly where standard rubber would have melted. The brown color is a nice bonus for matching industrial equipment.