Mutual Screw & Supply

Joints toriques Viton FKM 0,21" CS X 3,225" DI | AS568-339 | Dash 339 | Dureté 90 (25 / Pqt.)

Joints toriques Viton FKM 0,21" CS X 3,225" DI | AS568-339 | Dash 339 | Dureté - Main image
$39.13 $60.2 In stock

Joints toriques Viton FKM en taille AS568-339, diamètre intérieur de 3.225 pouces par section de 0.21 pouces. Plage de service de -15°F à +400°F (-26°C à +204°C). Également connu sous le nom de FKM, fluoroélastomère.

Spécifications

  • Type de produit : Joint torique
  • Matériau: Viton FKM
  • Taille AS568 : 339
  • Section : 0.21 pouces (5.33 mm)
  • Diamètre intérieur : 3.225 pouces (81.91 mm)
  • Dureté : 90 Shore A
  • Plage de température : -15°F à +400°F (-26°C à +204°C)
  • Type de mesure : Impérial
  • Quantité par paquet : 25 par paquet
Avant de payer

Les moyens de paiement et le total final s’affichent au paiement.

Quand part la commande

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Demander un remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Frais de livraison

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Retourner un article

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (5.0 / 5 · 5 reviews)

Richard ★★★★★

These are working perfectly in a high-heat application where standard Buna-N kept failing. The 3.225" ID fit my groove snugly, and the Viton material feels much more durable. Already ordered another pack for spares.

Hannah M. ★★★★★

The 90 durometer rating on these seals makes them feel really sturdy compared to the last ones I used. They seated perfectly into the groove and withstood a 350°F test cycle in my compressor without any issues.

Scarlett W. ★★★★★

I needed a high-temp seal for a steam application, and these Viton O-rings handle up to 400°F without any creep. The 90 durometer is noticeably firm, making installation easy without deforming.