Mutual Screw & Supply

O-Ring in silicone 0.21" CS x 2.35" DI | AS568-332 | Dash 332 | Conforme FDA | Durezza 70 | Rosso (40 / Confezione)

O-Ring in silicone 0.21" CS x 2.35" DI | AS568-332 | Dash 332 | Conforme FDA | - Main image
$33.1 $55.17 In stock

O-ring in silicone con diametro interno 568-332-2.35" e sezione trasversale 0.21". Intervallo di servizio da -80°F a +450°F (-62°C a +232°C). Conosciuti anche come VMQ, Silastic.

Specifiche

  • Tipo di prodotto: O-ring
  • Materiale: Silicone
  • Dimensione trattino AS568: 332
  • Sezione trasversale: 0.21" (5.33 mm)
  • Diametro interno: 2.35" (59.69 mm)
  • Durezza: 70 Shore A
  • Colore: Rosso
  • Intervallo di temperatura: -80°F a +450°F (-62°C a +232°C)
  • Tipo di misura: Imperiale
  • Conformità: FDA 21 CFR 177.2600
  • Quantità per confezione: 40 per confezione
Prima di pagare

I metodi disponibili e il totale finale sono indicati al pagamento.

Quando parte l’ordine

Considera il tempo di preparazione e quello di trasporto.

Standard Shipping: Preparazione (giorni lavorativi) 0–1; Trasporto (giorni lavorativi) 7–15.

Express Shipping: Preparazione (giorni lavorativi) 0–1; Trasporto (giorni lavorativi) 7–15.

Vedi condizioni
Chiedere un rimborso

Contatta il negozio con il numero d’ordine per chiedere del rimborso.

Chiedi i tempi del rimborso prima del reso.

Vedi condizioni
Costi di consegna

Controlla i costi per la destinazione e il servizio scelti.

Standard Shipping · Stati Uniti: 0,00 USD

Express Shipping · Stati Uniti: 3,99 USD

Vedi condizioni
Restituire un articolo

Verifica le condizioni prima di rispedire un articolo.

Stati Uniti · Termine di reso (giorni dalla consegna): 30. Metodo di reso: Per posta. Spese di reso: A carico del venditore.

Vedi condizioni

Customer Reviews (5.0 / 5 · 5 reviews)

Thomas ★★★★★

The high-temp range is what sold me—my compressor runs hot and these red silicone rings haven't melted or gotten brittle after a month of daily use. The 70 durometer feels just right, firm but with enough give to seat perfectly against the housing.

Olivia ★★★★★

Used these to replace worn seals on a brewery fitting and the -80°F to +450°F range gives me peace of mind for both cold storage and hot CIP cycles. The 70 durometer feels nicely firm yet still seats easily into the groove without fighting you.

Sebastian O. ★★★★★

The red color is a nice visual cue that these are the right parts for the job, and the 70 durometer silicone feels flexible yet sturdy when I install them. They slipped into the groove without any hassle, and knowing they handle up to 450°F gives me peace of mind for my hot water setup.