Mutual Screw & Supply

0.139" CS x 3.734" ID PTFE O-링 | AS568-240 | 대시 240 | 24 듀로미터 (10개/팩)

0.139" CS x 3.734" ID PTFE O-링 | AS568-240 | 대시 240 | 24 듀로미터 (10개/팩) - Main image
$37.11 $53.01 In stock

PTFE O-링, 내경 AS568-240, 3.734", 단면 0.139". 사용 온도 범위 -350°F ~ +500°F(-212°C ~ +260°C). 테플론, 폴리테트라플루오로에틸렌이라고도 합니다.

제품 사양

  • 제품 유형: O-링
  • 소재: PTFE
  • AS568 대시 크기: 240
  • 단면: 0.139"(3.53 mm)
  • 내경: 3.734"(94.84 mm)
  • 경도: 24 쇼어 A
  • 온도 범위: -350°F ~ +500°F(-212°C ~ +260°C)
  • 측정 유형: 인치
  • 포장 수량: 패키지당 10개
결제 전 확인

이용 가능한 결제 방법과 최종 금액은 결제 화면에 표시됩니다.

발송까지 걸리는 시간

주문 처리 시간과 배송 시간을 모두 고려하세요.

Standard Shipping: 주문 처리 (영업일) 0–1; 운송 (영업일) 7–15.

Express Shipping: 주문 처리 (영업일) 0–1; 운송 (영업일) 7–15.

정책 보기
환불이 필요할 때

환불 문의 시 판매점에 주문번호를 알려주세요.

반품 전에 환불 처리 기간을 확인하세요.

정책 보기
배송 비용

배송지와 선택한 서비스의 요금을 확인하세요.

Standard Shipping · 미국: US$0.00

Express Shipping · 미국: US$3.99

정책 보기
반품 전 확인

상품을 보내기 전에 적용되는 반품 조건을 확인하세요.

미국 · 반품 기한 (수령 후 일수): 30. 반품 방법: 우편 반품. 반품 배송비: 판매자 부담.

정책 보기

Customer Reviews (4.2 / 5 · 5 reviews)

Michael B. ★★★★★

I was worried about getting a good seal under high heat, but these PTFE rings held up perfectly at 450°F in my furnace. The 0.139" cross-section feels substantial and didn't deform at all.

Carter S. ★★★★★

The -350°F lower limit is perfect for our liquid nitrogen handling setup, and they fit the groove precisely without any binding. Out of 10, all sealed on the first try with no leaks visible under UV dye.

Owen ★★★★★

Installed these in a high-temp pneumatic application where standard rubber seals were failing weekly. The PTFE handles the 400°F cycles perfectly, and the 24 durometer gives just enough compliance to seal without being too stiff.