Mutual Screw & Supply

0.103" CS X 0.674" ID HNBR O-Rings | AS568-115 | Dash 115 | 70 Durometer (80 / Pkg.)

0.103" CS X 0.674" ID HNBR O-Rings | AS568-115 | Dash 115 | 70 Durometer (80 / - Main image
$39.89 $55.4 In stock

HNBR o-rings in AS568-115, 0.674" inner diameter by 0.103" cross-section. Service range -40°F to +300°F (-40°C to +149°C). Also known as HSN, Highly Saturated Nitrile.

Specifications

  • Product type: O-Ring
  • Material: HNBR
  • AS568 dash size: 115
  • Cross-section: 0.103" (2.62 mm)
  • Inner diameter: 0.674" (17.12 mm)
  • Durometer: 70 Shore A
  • Temperature range: -40°F to +300°F (-40°C to +149°C)
  • Measurement type: Imperial
  • Pack quantity: 80 per package
Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.4 / 5 · 5 reviews)

Grace G. ★★★★★

These seals fit perfectly on the hydraulic fittings I was repairing, and the 70 durometer feels firm but not too stiff. I used them in a hot oil application and they're holding up great at around 250°F.

Sebastian Y. ★★★★★

I haven't had a single leak since swapping these into my hydraulic actuator; the 70 durometer HNBR handles the heat and pressure much better than standard nitrile. They come in a generous 80-piece pack so I've got spares for future maintenance.

Robert ★★★★★

I needed seals for a high-temp valve application and these HNBR o-rings fit perfectly. The 70 durometer is firm enough to hold pressure without being hard to install. Glad I bought the 80-pack, as I'll use them again.