Mutual Screw & Supply

0.21" CS X 1.475" ID Viton FKM O-Rings | AS568-325 | Dash 325 | FDA Compliant | 60 Durometer | White (10 / Pkg.)

0.21" CS X 1.475" ID Viton FKM O-Rings | AS568-325 | Dash 325 | FDA Compliant | - Main image
$41.02 $55.43 In stock

Viton FKM o-rings in AS568-325, 1.475" inner diameter by 0.21" cross-section. Service range -15°F to +400°F (-26°C to +204°C). Also known as FKM, Fluoroelastomer.

Specifications

  • Product type: O-Ring
  • Material: Viton FKM
  • AS568 dash size: 325
  • Cross-section: 0.21" (5.33 mm)
  • Inner diameter: 1.475" (37.47 mm)
  • Durometer: 60 Shore A
  • Color: White
  • Temperature range: -15°F to +400°F (-26°C to +204°C)
  • Measurement type: Imperial
  • Compliance: FDA 21 CFR 177.2600
  • Pack quantity: 10 per package
Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.8 / 5 · 5 reviews)

James A. ★★★★★

The white color makes them easy to spot during assembly, and the 60 durometer hardness feels just right for a snug, flexible seal. I’ve used them in a steam line running near 300°F and they’ve held up without any softening or deformation over several weeks.

Andrew ★★★★★

The 60 durometer hardness feels just right for my application, and the FDA-compliant white material stands out visually when I’m checking for wear. The -15°F to +400°F range gives me peace of mind for hot fluid lines, and the fit on the 1.475" ID was spot-on.

George ★★★★★

Installed these to replace some worn seals on a hot water recirculation loop, and the -15°F to +400°F range gives me confidence they'll hold up. The 60 durometer feels just right for the flange fittings I'm using them on. So far, no leaks at all.