Mutual Screw & Supply

O-Rings Viton FKM 0,139" CS × 0,546" DI | AS568-207 | Dash 207 | Dureza 75 | Preto (75 / embalagem)

O-Rings Viton FKM 0,139" CS × 0,546" DI | AS568-207 | Dash 207 | Dureza 75 | - Main image
$34.69 $55.06 In stock

O-rings Viton FKM em tamanho AS568-207, 0.546" de diâmetro interno por 0.139" de secção transversal. Gama de serviço -15°F a +400°F (-26°C a +204°C). Também conhecido como FKM, fluoroelastómero.

Especificações

  • Tipo de produto: O-Ring
  • Material: Viton FKM
  • Tamanho do O-Ring: 207
  • Secção transversal: 0.139" (3.53 mm)
  • Diâmetro interno: 0.546" (13.87 mm)
  • Dureza: 75 Shore A
  • Cor: Preto
  • Intervalo de temperatura: -15°F a +400°F (-26°C a +204°C)
  • Tipo de medição: Imperial
  • Quantidade por embalagem: 75 por embalagem
Antes de pagar

Os métodos disponíveis e o total final aparecem no pagamento.

Quando sai a encomenda

Conte com o tempo de preparação e de transporte.

Standard Shipping: Preparação (dias úteis) 0–1; Transporte (dias úteis) 7–15.

Express Shipping: Preparação (dias úteis) 0–1; Transporte (dias úteis) 7–15.

Ver condições
Pedir um reembolso

Contacte a loja com o número da encomenda para tratar do reembolso.

Confirme o prazo de reembolso antes de devolver.

Ver condições
Custos de entrega

Verifique o custo para o destino e serviço escolhidos.

Standard Shipping · Estados Unidos: 0,00 US$

Express Shipping · Estados Unidos: 3,99 US$

Ver condições
Devolver um artigo

Confirme as condições antes de devolver um artigo.

Estados Unidos · Prazo de devolução (dias após entrega): 30. Método de devolução: Por correio. Custos de devolução: Pago pelo vendedor.

Ver condições

Customer Reviews (4.6 / 5 · 5 reviews)

Claire M. ★★★★★

Kept a few extras in the glovebox for a stubborn transmission leak, and the 0.546" inner diameter was spot-on for the fitting. These Viton rings handled the heat without swelling, which is more than I can say for the last batch I tried.

Thomas ★★★★★

The 75 durometer feels like a perfect middle ground for my hydraulic fittings—not too stiff, not too soft. I installed a few in a hot water valve and they seal perfectly at 190°F without any leaking.

Ryan O. ★★★★★

Installed these in a hydraulic pump that sees frequent 200°F oil, and the Viton material held up perfectly without any softening. The 0.139" cross-section fit snugly into the groove. Very pleased with the consistent quality across all 75 rings.