Mutual Screw & Supply

0.103" CS X 1.924" ID Buna-N 腈橡膠 O型環 | AS568-135 | Dash 135 | 50 硬度 (200入/包)

0.103" CS X 1.924" ID Buna-N 腈橡膠 O型環 | AS568-135 | Dash 135 | 50 硬度 (200入/包) - Main image
$39.66 $57.48 In stock

Buna-N 丁腈橡膠 O 型環,規格 AS568-135,內徑 1.924 英吋,線徑 0.103 英吋。適用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 徑號: 135
  • 線徑: 0.103 英吋(2.62 毫米)
  • 內徑: 1.924 英吋(48.87 毫米)
  • 硬度: 50 Shore A
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 200 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Ella C. ★★★★★

I was worried these would be too stiff, but the 50 durometer rubber seals perfectly in my pneumatic cylinder without any leaks. The 0.103" cross-section is exactly right for the groove depth, and they handle the heat from my compressor just fine.

Richard K. ★★★★★

The 50 durometer is nice and pliable, made installing them in a tight spot much easier than I expected. These o-rings fit perfectly on the flange I needed for a pneumatic application.

Ellie K. ★★★★★

I needed these for a hydraulic repair and the 50 durometer rubber was soft enough to conform without over-compressing. They slid right into the groove and haven’t leaked a drop in the first few cycles.