Mutual Screw & Supply

Buna-N 腈橡膠 O 型環 | AS568-178 | Dash 178 | 硬度 70 | 黑色 (75/包)

Buna-N 腈橡膠 O 型環 | AS568-178 | Dash 178 | 硬度 70 | 黑色 (75/包) - Main image
$44.19 $62.24 In stock

AS568-178 尺寸的丁腈橡膠 (Buna-N) O型環。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。也稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O型環
  • 材質: 丁腈橡膠 (Buna-N)
  • AS568 短劃尺寸: 178
  • 硬度: 70 蕭氏A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 75 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.4 / 5 · 5 reviews)

Charlotte I. ★★★★★

Used these for a hydraulic repair on a log splitter and they handled the pressure perfectly. The 70 durometer is firm enough to seal but not too hard to install.

Daniel ★★★★★

I needed a fresh set of o-rings for a hydraulic cylinder rebuild, and these 70 durometer Buna-N ones seated perfectly in the grooves, the material feeling just right. They've held up well through temperature cycles from cold mornings to hot afternoons without any cracking or leaks.

Hazel V. ★★★★★

Got the AS568-178 pack for a compressor rebuild and they seated nicely in the grooves without rolling or pinching. The 70 durometer feels firm but flexible enough to get a tight seal, and I appreciate that they handle temps up to 250°F since my setup runs warm.