Mutual Screw & Supply

0.139" CS x 0.171" ID 丁納橡膠Nitrile O型環 | AS568-201 | Dash 201 | 硬度70 | 黑色 (1200個/包)

0.139" CS x 0.171" ID 丁納橡膠Nitrile O型環 | AS568-201 | Dash 201 | 硬度70 | 黑色 - Main image
$35.77 $54.2 In stock

Buna-N 丁腈橡膠 O 型環,規格 AS568-201,0.171" 內徑 x 0.139" 截面。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。也稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 規格尺寸: 201
  • 截面: 0.139"(3.53 mm)
  • 內徑: 0.171"(4.34 mm)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 1200 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Sophia A. ★★★★★

The 0.139" cross-section is exactly what I needed to replace some worn seals in a hydraulic fitting, and the 70 durometer feels just right for the pressure range. I've used Buna-N before, and these fit snugly without any leaking.

Zoe ★★★★★

Finally got these for a pneumatic seal repair and the 0.171" ID is a perfect match on the shaft. The consistency across all 1200 rings is spot on, no weird flash or out-of-round ones in the batch.

Leo ★★★★★

The 70 durometer hardness feels just right for seating firmly without cracking on installation. I’ve used these to replace worn seals on hydraulic fittings and they’ve held up through repeated heat cycles up to the 250°F rating without leaking.