Mutual Screw & Supply

Buna-N 腈橡膠 O型環 | 0.139" CS × 3.234" ID | AS568-236 | Dash 236 | 硬度70 | 黑色 (200個/包)

Buna-N 腈橡膠 O型環 | 0.139" CS × 3.234" ID | AS568-236 | Dash 236 | 硬度70 | 黑色 - Main image
$39.58 $56.54 In stock

Buna-N 丁腈橡膠 O 型環,尺寸為 AS568-236,內徑 3.234",截面 0.139"。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。也稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 尺寸代號: 236
  • 截面: 0.139" (3.53 公釐)
  • 內徑: 3.234" (82.14 公釐)
  • 硬度: 70 蕭氏A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F (-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 200 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Owen O. ★★★★★

These o-rings sealed the pressure vessel on my air compressor perfectly after I cleaned out the old grooves. The 70 durometer feels just right for a snug fit without being too hard to install.

Ellie V. ★★★★★

Went through a full keg rebuild over the weekend and every one of these 236s seated perfectly. The 70 durometer has just the right give for a tight seal without feeling mushy, and the -40°F rating gives me peace of mind for winter outdoor use. Four dozen left in the bag for the next project.

Jason R. ★★★★★

Needed these for a hydraulic pump rebuild and the 3.234" ID was spot-on. They seated perfectly and the Buna-N material handled the oil and heat without swelling up.