Mutual Screw & Supply

0.139" CS x 4.484" ID 丁腈橡膠O型環 | AS568-246 | Dash 246 | 硬度90 (100個/包)

0.139" CS x 4.484" ID 丁腈橡膠O型環 | AS568-246 | Dash 246 | 硬度90 (100個/包) - Main image
$31.58 $50.94 In stock

Buna-N Nitrile O 形環,尺寸 AS568-246,內徑 4.484 英吋,截面 0.139 英吋。服務溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O型環
  • 材質: 布納-N 腈橡膠
  • Dash 尺寸: 246
  • 截面: 0.139" (3.53 公釐)
  • 內徑: 4.484" (113.89 公釐)
  • 硬度: 90 蕭氏 A
  • 溫度範圍: -40°F 至 +250°F (-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 100 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Sebastian ★★★★★

The 90-durometer hardness on these o-rings is exactly what I needed for a high-pressure pneumatic seal; they fit the groove perfectly without any deformation. I installed a few on a hydraulic cylinder and the leak stopped immediately, even at 150°F operating temp. The 100-piece pack gives me plenty

James ★★★★★

Finally got around to rebuilding my pneumatic cylinder and the 90-durometer material on these o-rings gives a nice firm seal without being impossible to install. The 4.484" ID slips right over the piston with zero play, exactly what I needed for that application.

Charlotte F. ★★★★★

The 4.484" inner diameter fits my hydraulic cylinder perfectly, and the 90 durometer feels firm enough to hold pressure without being too brittle. I've had them sitting on a hot pump housing for a week now with no signs of degradation.